Satellite Internet Forum

is there any other way to configure linkstar terminal except telnet :?:

Two out of five Linkstar boxes we have ordered recently are having the same problem - the "SAT" led will not come on. :?:
When we telnet into the box and use the command tcmp, we can see that the coderate section as A/N instead of 5/6. At first we thought the boot-string was missing so we applied it and it was accepted by the box but ...

First I would like to say that is a great web site. This is my first time posting. Ok, the problem is I had all of my equipment set up and had a BER of .000004-.000002 (93%Signal) but, the LinkStar modem kept dropping the link. It was very random, it would stay linked for 5 or 6 days then drop the link, anywhere from 5 mins. to 3 to 4 hours. Sometimes it was every ...

I have 2 terminals both programed Identically. The LED on one for the Sat signal will blink. slow 1 sec on and off it will not go to the fast blink.

When i switch the terminals the other acts normally. everything from the dish to the terminals is working properly the BER for both is usally 0 or.00000x. power out put for both at the dish is the same. Any ideas why the one terminal ...

Hi all, I have Linkstar Modem which the FW version is locked by Particular ISP. I treid the method of

unlockrcst -kr 0000
unlockrcst -kr 999

But No success :? RCST LOCK Info Below:

rcst info:
RCST locked with software version prior to 2.2

Does anybody could help regards this Issue?

Hi guys,

Just wondering if somebody more knowledgeable than myself could tell me what a Viasat Linkstar modem (Part # 1038981) is worth in $AUD?

I guess it might be good to know what a compatible 1.2m dish should set me back as well.

My reason for asking is that I'm in dispute with my ISP over the allotment of my Broadband Connect funding and I need to know some ballpark figures before I pursue ...

I cannot access my network beyond the satelite router though all routings link the satellite router to the rest of the network. I have enabled TCP accelerator to allow fast browsing. Please anyone solved this before? :?: Thank you!

I have 2 Linkstar terminals both programed Identically. The LED on one for the Sat signal will blink. Slow 1 sec on and off it will not go to the fast blink. When i switch the terminals the other acts normally. everything from the dish to the terminals is working properly the BER for both is usally 0 or.00000x. Power out put for both at the dish is the same. Any ideas why the one ...

Hello

I operate an Internet cafe and my Internet connection is via satellite. The satellite modem is Linkstar. Recently my Internet cafe started offering Internet phone call services. So at present it offers net broswing and VoIP services.

As for the VoIP, I use Net2phone IP phone. But the quality of the VoIP is very bad especially when my LAN is busy. My customers are complaining about the quality of the VoIP.

I have discussed ...